Funny kveld men samtidig litt tilbake til topic...
FAQ'S| All
Helpful Hints | Nordost Blog
Så å investere i "verdens dyreste" kabel og ikke øke over minimums lengden vil være lite smart tenker jeg da.
FAQ'S| All
Helpful Hints | Nordost Blog
Q: How much time is required to break in a power cord?
A: Power cords have the fastest burn in time of any cable, thanks to the amount of current flowing through them. Typically, they are good to go within 48-72 hours of continual use. When breaking in any other Nordost cable, we recommend 168 hours for our Leif and Norse 2 ranges, and 336 hours for our Reference cables. Although, it’s best to go to your local authorized Nordost dealer and ask about the ability to burn them in on our VIDAR machine (however, this service is not available for power cords).
The minimum recommended lengths of Nordost cables are as follows:
Power cables – 2 meters
Analog interconnects – 1 meter
Digital interconnects – 1.5 meters
Tonearm cables – 1.25 meters
Loudspeaker cables – 2 meters
Q: I am looking to buy a power cord, but I don’t know what length to get: 1 or 2 meters. Do cables at different lengths sound different?
A: The jump from a 1 meter to a 2 meter cable is the most noticeable jump when comparing any length. While a 1 meter power cord won’t sound bad by any stretch of the imagination, the 2 meter cable will sound smoother, since the resonance is being spread out over a longer length.
Så å investere i "verdens dyreste" kabel og ikke øke over minimums lengden vil være lite smart tenker jeg da.