Skulle tro sort ga mørkere bakgrunn.Mint grøn only. Har eksperimenteret med det. Næstbedst er pink. Med sort bliver lyden alt for flad.
CEF Radio Frequency / Electromagnetic Interference Suppression:
Typical Properties: Not for specifications. Values are typical, not to be considered minimum or maximum. Properties measured at room temperature 73°F (~23°C) unless otherwise stated.
>10Hz-100KHz: 84dB to 94dB
>100KHz to 1MHz: 82dB to 93dB
>1MHz to 2GHz: 85dB to 100dB
>2GHz to 10GHz: 100dB to 130dB
>10GHz to 18GHz: 130dB to 150dB
1. Mil-STD-202 Method 303 maintained at 5 psi (3.4N/cm2) measured over 1 in2 surface area. Conductive particles in the adhesive provide the electrical path between the application substrate and the foil backing.
2. UL Recognized for flame retardancy per UL 510, Product Category OANZ2, File E17385
3. ASTMD-4935 Test Method
How do they work?
Out-of-the-box the QUADcell Outlet Cover will require 225-250 hours for a complete break-in. When CEF is applied to a circuit, all appliances and electronics installed throughout the circuit will be conditioned to our noise specifications. No other product that we are aware of can deliver this level of power conditioning.
Alan Maher Designs turns a standard outlet cover into a true, non-limiting power conditioner. Our Outlet Cover reduces Extreme Low Magnetic Fields, Electromagnetic Radiation, and Electromagnetic Fields by using a combination of the Third Law of Thermodynamics and negative radiation cancellation. Our design attaches a small negative ionic charge to the electrical positive ionic energy field passing through the in-wall circuit. By regulating the temperature and manipulating the frequency suppression, we are able to produce a one-for-one ionic cancellation. In electrical design, harmonics, radio frequency, and static noise are all combinations of a positive ionization field associated with electromagnetic radiation. By cancelling the field, we can significantly lower EMR’s effect on the circuit and all electronics plugged in to the circuit.
NOW NEW! Ultimate Beeswax SHD - Super High Definition!
Introducing Audio Magic's new Ultimate SHD Beeswax Fuse. We didn't think it could be any better but the new "Ultimate" is world class and then some! Now using a push-pull I-Core design instead of the single Core and Audio Magic upgraded the Black Out powder mixture for a broader noise absorption parameter. The new Ultimate is extremely difficult to build considering Audio Magic is drilling into both sides of the fuse now, sometimes it takes up to 3 tries to get one good fuse - lots of labor involved. This fuse will give you tighter bass and yet sound relaxed - very natural sounding. The sound stage will become bigger and deeper, more detailed, better layering, better micro detail but with a relaxed musical presentation. This is not a subtle upgrade from the original Beeswax SHD fuse which will stay in the line up. For people that have to have the best this is it! Global retail price is $225.00 each.
The new Beeswax SHD fuse incorporates a triple layer design with 2 new proprietary components to make the fuse even quieter with a better transfer of current and re location of the Beeswax inside of the fuse for better stability.
Ultimate Beeswax fuses are made-to-order. Please allow a 7-10 days factory lead time.
Audio Magic Premiere SUPER fuse:
The Audio Magic Premiere SUPER fuse incorporates Audio Magic's anti vibration fluid to stop the element from vibrating at 50/60 hz and then the blackout powder super mix to absorb all EMI and RFI riding the element as well as ambient sources and insert a new HRC core which allows the signal to travel through the fuse in a more cohesive and linear manner. The Premier SUPER fuse is 30% better than the Audio Magic's original SUPER fuse in every way!
Much more detail top to bottom, wider and deeper soundstage, much better inner detail, layering, and a lot more air around instruments and voices.
Så lenge siste idiot enda ikke er født og så lenge det eksisterer betalingsvilje så vil denne tråden leve i beste velgående.Ser ut til å være nok av remedier der ute til å holde en slik tråd i live til tidenes ende.
Kanskje det hjelper hvis jeg steriliserer meg ???Så lenge siste idiot enda ikke er født og så lenge det eksisterer betalingsvilje så vil denne tråden leve i beste velgående.Ser ut til å være nok av remedier der ute til å holde en slik tråd i live til tidenes ende.
-BB-
..er vel ikke slik at alle innlegg her handler om deg?…...
Kanskje det hjelper hvis jeg steriliserer meg ???
Skrekk og gru!! DIsse passer jo bare til amerikanske standardbokser! Hva skal folket gjøre???Hva med noen nye "cover" til vegguttakene dine? Kun noen tusenlapper pr. stk.
Aner vi konturene av audiofile covre til telefonen din snart?
https://www.alanmaherdesigns.net/pr...Bw_lZVO2hpByxEFjuYC4gngoAavf4ltWGbfjM3nvfa2lo
CEF Radio Frequency / Electromagnetic Interference Suppression:
Typical Properties: Not for specifications. Values are typical, not to be considered minimum or maximum. Properties measured at room temperature 73°F (~23°C) unless otherwise stated.
>10Hz-100KHz: 84dB to 94dB
>100KHz to 1MHz: 82dB to 93dB
>1MHz to 2GHz: 85dB to 100dB
>2GHz to 10GHz: 100dB to 130dB
>10GHz to 18GHz: 130dB to 150dB
1. Mil-STD-202 Method 303 maintained at 5 psi (3.4N/cm2) measured over 1 in2 surface area. Conductive particles in the adhesive provide the electrical path between the application substrate and the foil backing.
2. UL Recognized for flame retardancy per UL 510, Product Category OANZ2, File E17385
3. ASTMD-4935 Test Method
How do they work?
Out-of-the-box the QUADcell Outlet Cover will require 225-250 hours for a complete break-in. When CEF is applied to a circuit, all appliances and electronics installed throughout the circuit will be conditioned to our noise specifications. No other product that we are aware of can deliver this level of power conditioning.
Alan Maher Designs turns a standard outlet cover into a true, non-limiting power conditioner. Our Outlet Cover reduces Extreme Low Magnetic Fields, Electromagnetic Radiation, and Electromagnetic Fields by using a combination of the Third Law of Thermodynamics and negative radiation cancellation. Our design attaches a small negative ionic charge to the electrical positive ionic energy field passing through the in-wall circuit. By regulating the temperature and manipulating the frequency suppression, we are able to produce a one-for-one ionic cancellation. In electrical design, harmonics, radio frequency, and static noise are all combinations of a positive ionization field associated with electromagnetic radiation. By cancelling the field, we can significantly lower EMR’s effect on the circuit and all electronics plugged in to the circuit.
Er vel også tilpasset det amerikanske kunnskapsnivået når det gjelder forståelsen av elektrisitet ???Skrekk og gru!! DIsse passer jo bare til amerikanske standardbokser! Hva skal folket gjøre???
For the version 3.1 upgrade, We are doing parts specially selection, By a high accurate way(similar to what FM acoustic does) And this takes effort by only two engineers with such ability.And by this way, we can only have 1 part being approved out of 16 parts (1/16 chance) This takes many times and we will drop all the unselected parts.Which is where the costs from. Until now, we have purchased more than 10,000 parts and select one by one. only hundreds of parts are been selected.
In Taiwan market trial run, We have more than 20 customers made the upgrade(and it is growing), In our average feedback, from these customers, They mentioned the upgrade is like 300%~500% improvement. We even have customer said that the upgrade range, Is like adding USD30,000 audio tuning accessories to the system.
Introduction
This is the very first time a circuit design which is a combination of resonance and Noise and transform into light!
The Internal quantum modules is combined with eight resonate channel and a core processor, the engineer detect the power outlet wave type by internal IC, and generates instant synchronous phase distortion compensation which is made for the beautification waveform through precise resonance and reduce phase distortion.
Låter kort sagt som ethvert annet placebo.Thus a whole new audio processing technology-QNR has been released, The actual listening experience to the sound system make more sense and focus on, more precise audio clarity, the whole background is black and silence, music is enhanced with more charm and smoothness.
Godt de påpeker at dette ikke var en vitenskapelig test, og deretter kommer til en klar konklusjon.
Egentlig totalt OT dette her. Motsatt av intensjon til trådenNote: As with our Snake Oil, this is obviously a joke. There is no evidence to suggest 'burning in' your cables will make any audible difference.
Det er det faktisk noe her inne som brukerHvem var det som hadde de der små gong-klokkene som man skulle henge rundt omkring i rommet?
...tja, nå blir jeg sikkert uthengt og mobba. Men; jeg har testet samme portable disk med hhv. USB og Firewire400 kabling, og det var ullen lyd når det ble spillt via USB... To par ører var enige om at det var klar forskjell.