Som sikkert noen her har fått med seg så snuser jeg på muligheten for dsp i systemet.
For morroskyld, og gjennom en prat med en kompis some r veldig begeistret forAi fikk jeg ånden over meg og spurte:
how can i use cambridge evo150 with dsp for only two floorstanding pmc speakers
Svaret jeg fikk:
To use the Cambridge Audio EVO 150 with DSP for two floorstanding PMC speakers, you have a few options:
- Use the WiiM Pro Plus: This device allows you to stream equalized audio to your EVO 150. It offers both graphic and parametric EQ options4.
- Use a MiniDSP device: You can connect a MiniDSP 2x4HD or Flex between the EVO 150's pre-out and aux-in. This method allows you to apply parametric EQ or even use Dirac Live room correction4.
To set up the MiniDSP:
- Connect the EVO 150's pre-out to the MiniDSP's input.
- Connect the MiniDSP's output to the EVO 150's aux-in.
- Use the MiniDSP software to apply your desired EQ settings.
Note that this setup may result in having two volume controls to manage
4.
When connecting your PMC floorstanding speakers, use the main speaker terminals (Speaker A) on the EVO 150
7. The EVO 150 delivers 150W per channel into 8 Ohms, which should be sufficient to drive most PMC floorstanding speakers
8.
Remember to experiment with speaker placement and room treatment before resorting to DSP, as these can significantly impact sound quality, especially in the midrange and high frequencies
4.
For dere som er bevandret i DSP`ens spennende univers. Gir dette mening? Kan jeg altså leve i den eksisterende integrerte verdenen, og innføre en minidsp uten å skape en eller annen dårlig løsning?
(beklager å bry dere og bare ignorere taggen hvis det oppleves som masete at jeg spør noen av dere som fremstår som kloke highwaymen innenfor tematikken)
@bjarnetv @MakkinTosken @Roald @Hornlyd @Valentino @The Shy @Snickers-is @Sevald